As any tattoo artist knows, having the right equipment is essential for creating quality tattoos. Among the most important pieces of equipment is the tattoo machine. One type of tattoo machine gaining popularity is the coil tattoo machine. Coil machines are known for their reliability and precision, making them good for beginners and experienced tattoo artists. If you’re investing in a new device, you need to know How to Set up a Coil Tattoo Machine Professionally.
What is a coil tattoo machine?
A coil tattoo machine is a type of tattoo machine that uses coils to create the tattoo design. The coil machine has a power supply that provides the electrical current to the coils. The coils are connected to the armature bar, and they move up and down, which makes the needle move in and out of the skin. The power supply can control the speed of the needle movement.
What will you need to set up a coil tattoo machine?
- Tattoo machine
- Coils (two)
- Spring (one)
- Armature bar
- Capacitor (electrolytic capacitor, 0.01µF to 0.1µF, 400v or higher)
- Footswitch
- Clip cord
- Power supply
How to set up your coil tattoo machine?
- First, you will need to gather all of the necessary supplies mentioned above.
- Next, you will need to assemble the machine. Start by attaching the coils to the machines’ studs. Make sure that the coils are facing the right way, with the north poles pointing towards the front of the machine.
- Once the coils are in place, attach the spring to the rear stud. Make sure the spring is oriented correctly, with the coils pointing to the rear of the machine.
- Next, attach the armature bar to the front stud. The armature bar should be positioned to level with the coils.
- Now, it’s time to connect the capacitor. Connect the positive lead to the front stud and the negative lead to the rear stud.
- Finally, connect the footswitch and clip cord to their respective terminals on the power supply.
Your coil tattoo machine is now ready to use! Test it out before you start tattooing clients to ensure that everything is working properly.
Setting Up A Single Coil Tattoo Machine:
Like any other device, a single coil tattoo machine requires a proper setup guide. Most people need to learn how to set up the tattoo machine properly and end up causing problems in the practice sessions and sometimes even client sessions. Hence, it’s better to learn the proper way of resetting the coil machine according to professionals:
- Once you have unpacked the tattoo machine, gather all the equipment to start the setup.
- Firstly, attach the needle bar to the armature bar to ensure it’s safe and ready for action.
- Now, slide the armature bar via the coil’s core to the effect of rotation cycles that can reach the armature bar and, finally, the needle bar.
- Now, once all equipment is properly attached, provide a power supply that would provide the electricity, but wait to turn it on.
- Likewise, you can adjust the depth of the needle using the contact screw of the coil tattoo machine.
- Finally, after all the fixings and adjustments to the parts of the single coil tattoo machine, you can turn on the power supply to check the movement of the needle and overall mechanism.
Impact Of Tattoo Coils On Performance:
There’s no denying the fact that there is a huge impact of tattoo coils on the overall performance and mechanisms of tattoo machines. The tattoo coils are responsible for electromagnetism in the motor for rotation cycles. Eventually, this causes up and down motion of the tattoo needle into the skin to create tattoo ideas and designs. So, the amount of coils in a coil tattoo machine helps the mechanism be more stable, effective, and seamless.
In addition to that following are some other key roles of tattoo coils:
- As mentioned earlier, the needle movement is directly dependent upon the electromagnetic coils; high-quality coils lead to more accurate and fast tattooing procedures.
- If the coils create constant needle cycles, it gives a more consistent and professional look to the tattoo ink on the skin.
- Mostly, multiple coils require high voltage to initiate the tattooing process, but this results in more power to the needle cycles and durable usage.
How to install the tube and needle?
1. Unscrew the back cap of the gun to open it up.
2. Take your tube and screw it into the front portion of the gun where the needle will go.
3. Hand-tighten the connection until it’s snug, being careful not to over-tighten and crack the tube.
4. Next, insert your needle into the tube. Again, hand-tighten the connection until it’s snug.
How to fix the tension on the springs?
1. To adjust the tension on the springs, start by unscrewing the back cap of the gun.
2. Next, locate the screws that hold the springs in place. These will be located on either side of the machine.
3. Use a screwdriver to loosen or tighten these screws until the spring tension is where you want it.
How to set the stroke length of a coil tattoo machine?
1. The stroke length of a coil tattoo machine is adjusted by loosening or tightening the set screw on the armature bar.
2. To adjust the stroke length, start by unscrewing the back cap of the machine.
3. Next, locate the set screw on the armature bar. This will be located near the front of the machine.
4. Use a screwdriver to loosen or tighten this screw until you have achieved the desired stroke length.
Frequently Asked Questions:
Yes, a coil machine is rather easy to set up if you pay attention to the guidelines and it accordingly. Mostly, problems occur when people need to pay more attention to guidance from the manufacturers or a professional tattoo equipment expert and experiment by themselves. Always remember that a coil machine is a sensitive device in the context of its usage on the human body. So, set it up as advised by a professional rather than going experimental.
It’s good to oil your machine after every use to keep it running smoothly and prevent rusting.
Your machine is properly tuned when it runs smoothly and evenly. If you find any unusual noises or the machine seems to be running rough, it’s time for a tune-up.
Conclusion:
We’ve walked you through how to set up your coil tattoo machine. It can be tricky, but with a little patience and some practice, you should be able to get it right. Once your machine is set up, make sure to take care of it to last as long as possible. Keep your tubes and needles clean and in good condition, and always use fresh ink when working with a client. Now that you know how to set up your coil tattoo machine. Then get started on creating beautiful works of art!
Related: Best Ultrasonic Cleaner for Tattoo Equipment (Tattoo Clean Supplies)
Leave a Reply